Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (442) 479-5013

Chimney Inspection Levels: Level 1, Level 2 and Level 3 Explained

Serving Brooklyn and nearby cities.

  • Diagnosis before any repair
  • Written price up front
  • Written price before we start

Not every chimney inspection is the same. Chimney professionals use three inspection levels, and each goes a step deeper than the one before it. The right level depends on what has happened with your chimney since it was last checked: nothing at all, a change to the system, or a sign that something is wrong where no one can see it. This guide explains what each level covers, when you need it, what you receive afterward, and how to get your Brooklyn home ready for the visit.

Why Your Chimney Needs a Yearly Inspection

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. That applies whether you burn wood several nights a week or have a gas boiler venting through an old masonry flue. Creosote, cracked flue tiles, loose bricks, animal nests and water damage can build up over time without any obvious sign from inside the house.

In New York City, timing matters. The city's heat season runs from October 1 through May 31, when building owners must keep apartments heated to the city's minimum temperatures. Scheduling your inspection before that stretch begins gives you time to handle any repairs before the heating system is running every day.

Level 1 Inspection: The Annual Check

A Level 1 inspection is the right choice when nothing about your chimney or the appliances connected to it has changed, and you plan to keep using it the same way. It is the standard yearly visit.

Our certified technician examines the parts of the chimney that can be reached without tools that open walls or remove fixed parts. That usually includes:

  • The firebox, smoke chamber and readily visible flue
  • The damper and how well it opens and closes
  • Connections between appliances and the chimney
  • Creosote and soot buildup, and whether a chimney sweep is needed
  • Blockages such as nests, leaves or fallen debris
  • Visible exterior masonry, the chimney cap and the chase cover where accessible

Level 2 Inspection: When Something Has Changed

A Level 2 inspection includes everything in a Level 1, plus a video camera inspection of the inside of the flue and a look at accessible areas such as attics, basements and crawl spaces where the chimney passes through.

You need a Level 2 when the system changes, such as installing a new appliance or switching fuels, and when a home is sold. Chimney professionals also commonly recommend one after a chimney fire, a severe storm, or any event that could have damaged the structure.

Fuel switches are common in Brooklyn. When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue. A Level 2 inspection shows whether your existing flue can handle the change or whether chimney liner installation should be part of the project.

Level 3 Inspection: Reaching a Hidden Hazard

A Level 3 inspection is used when a serious hazard is suspected and the only way to confirm it is to open part of the chimney or the building. That might mean removing a section of the chimney wall, a chase panel, or interior finishes next to the flue.

This level is not routine. It is usually recommended when a Level 1 or Level 2 inspection turns up signs of a concealed problem, such as smoke or water stains in the wrong place, damage that appears to continue behind a wall, or questions about how the chimney was originally built. We explain why the extra access is needed and what will be opened before any work begins, so you can make an informed decision.

What You Get After the Inspection

An inspection is only useful if you understand what was found. After every visit you receive clear documentation you can keep for your records, share with a buyer or seller, or use to plan repairs.

  • Photos of the conditions we found, including problem areas
  • Video footage of the flue interior for Level 2 and Level 3 inspections
  • A written report listing what was inspected, what we found, and what we recommend
  • Plain explanations of which issues need attention now and which can be monitored
  • Next steps if work is needed, such as chimney repair, waterproofing, fireplace and damper repair, or chimney rebuilding

How to Prepare for Your Inspection

A little preparation helps the visit go smoothly and lets the technician see everything that needs to be checked.

  • Stop using the fireplace or stove the day before so the firebox and flue are cool
  • Clear furniture, decorations and rugs from the area in front of the fireplace
  • Make sure we can reach the attic, basement or boiler room if your chimney passes through them
  • Let us know about roof access, building rules, or a super who needs to be contacted
  • Keep pets in a separate room during the visit
  • Write down any concerns, such as odors, drafts, leaks, or sounds of animals in the chimney

Inspections

Three levels of chimney inspection

The NFPA 211 standard calls for a yearly inspection. Which level you need depends on what has changed since the last one.

  1. Level 1

    Annual check

    For a chimney and appliance that have not changed and will be used the same way: the readily accessible parts of the chimney, the flue and the connection, checked for soundness, blockages and deposits.

  2. Level 2

    Camera inspection

    When something changed — a new stove, insert or boiler, a fuel switch such as oil to gas, the sale of the home, or a chimney fire, storm or quake. Adds a video scan of the whole flue and the accessible attic, roof and crawl spaces.

  3. Level 3

    Concealed areas

    Only when a Level 1 or 2 points to a hidden hazard that cannot be checked any other way: parts of the chimney or building are opened to reach it.

How each level works

FAQ

Common questions

Don’t see your question? Call (442) 479-5013 and we’ll talk it through.

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year, even if you rarely use your fireplace.

Which inspection level do I need if I am selling my home?

A Level 2 inspection is used when a home is sold. It includes a video inspection of the flue and gives buyers and sellers a documented picture of the chimney's condition.

Do I need an inspection if I am converting from oil to gas?

Yes. In New York City, the chimney has to be evaluated when a boiler converts from oil to gas. A new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue.

Is a chimney sweep the same as an inspection?

No. A chimney sweep removes soot, creosote and debris. An inspection evaluates the condition of the chimney. They are often scheduled together, and an inspection may show that a sweep is needed.

Will a Level 3 inspection damage my home?

A Level 3 inspection requires opening part of the chimney or building to reach a suspected hazard. We explain exactly what needs to be opened and why before any work begins.

Should I schedule an inspection after a chimney fire or storm?

Yes. Chimney professionals commonly recommend a Level 2 inspection after a chimney fire or severe storm, because damage inside the flue is often not visible from the fireplace.

Schedule a chimney or vent inspection

Tell us what you are noticing, whether it is a smell, a leak or a dryer that runs too long. We will look at the whole system, show you what we find and give you a written price before any work begins.

(442) 479-5013
Call (442) 479-5013 Request Service